|
AP-2000i
- Advanced CCPM Mixer, Digital Cyclic Ring and Flight Stabiliser
The AP-2000i is one of
the most advanced aeromodelling avionics products available today. It
is designed particularly for use in scale, flybar-less and aerial
photography helicopters. At
its heart there are three distinct devices all housed in the same
package. Each of these can be individually enabled or disabled
depending on the user requirements.
Advanced Flight
Stabiliser
- The
AP-2000i was designed for fast model recovery and yet smooth hover with
particular attention to the needs of aerial photography applications.
- It
supports both infrared horizon sensors as well as inertial sensors.
Please contact us for further details and availability of these
optional accessories. Availability and price of the inertial sensor TBA.
- When
flight stabilisation is not desirable, this functionality can be fully
disabled.
Digital Cyclic Ring
- Pioneered by Spartan RC the
“digital cyclic ring” technology eliminates swashplate
binding at extreme diagonal stick deflections.
- We
strongly support the use of the digital cyclic ring but should the
customer prefers not to use it, this functionality can be fully
disabled.
CCPM Mixer
- The
AP-2000i incorporates one of the most advanced electronic CCPM mixers,
designed with particular attention to the special requirements of scale
and flybar-less helicopters.
- Endpoint
adjustment, servo reversing and digital centre-point trims for all four
servos for achieving optimum mechanical geometry.
- Swashplate
types: 120deg CCPM, 140deg CCPM , 90deg CCPM (4 servo). Mechanically
mixed swashplates are also supported.
- Precision
rotor phasing adjustment. +/-90 degree range, in 1 degree increments.
An essential adjustment for all multi-bladed helicopters.
General features:
- Works
with all PCM, PPM/FM and Spread Spectrum receivers and supports both
digital and
conventional servos.
- Hardware
based 1800 position servo pulse sampling and regeneration for super
smooth and jitter free movements.
- Enables
the use of piezo gyros on cyclic for stabilising multi-bladed and
flybarless helicopters.
- Easy
configuration of all parameters via a simple LCD user interface.
- Separately purchased USB
interface allows reprogramming the unit with new firmware releases
available from our website. This universal interface works with all
existing and future Spartan RC products.
Specifications:
- Operating
voltage: 4 - 10 Volts, current draw <15mA
- Compact
design measures:
55mm x 36mm x 13mm
- Weight:
25 grams
- Operating
conditions: 0 to 50 deg C, 32 to 122 deg F, 20 to 85 %
humidity not condensing.
- Storage:
-20 to 70 deg C, -68 to 158 deg F, 20 to 90 % humidity not
condensing.
|
|
|
|
