 |
 |
|
|
• Sensor Preparation - If your Vortex has a remote sensor you can connect it to the IMU port of the flight computer now.
|
• Mounting and Wire Exit - Select the mounting orientation. The first two letters denote how the unit is mounted on the helicopter and the remaining two the direction that cables exit from the unit. For example 'UpBk' means upright (Up) and the cables or connectors are towards the back (Bk) of the helicopter. Similarly, front (Fr), inverted (In), left (Lt), right (Rt). Here are some examples:
|
| • Sensor Live View - The bar graphs display live measurements from the gyro sensors. Rotate the helicopter in the pitch, roll and yaw axis and verify each sensor is reading the correct axis and direction. |
| • Complete - The sensor setup is now complete. Please proceed to the swashplate setup. |
|
|
|
|
 |
|
