Products | Store | Forum | Support | Register | Media | Company  

Knowledge base Quark Common problems

Question #32
With the rudder centred the servo creeps to full travel.
Answer
If the Status light blinks twice even when the rudder stick is centered it is an indication that the gyro does now have accurate knowledge of the rudder neutral. A such the gyro thinks that a yaw command is present and moves the servo accordingly. Please see separate topic in this FAQ on how to rectify this.

The servo creep can also be caused if the helicopter is moved while the gyro is calibrating in the first few seconds after power on.
Back to Common problems
Products | Store | Forum | Support | Register | Media | Company
  ©2004-2019 Spartan RC - T&Cs of access.
Home | Contact Us