Products | Store | Support | Register | Media | Company  

Knowledge base Quark Firmware

Question #51
The firmware update failed and my gyro is now dead.
Answer

Even if the Status light does not light up the gyro continues to function for the purpose of running the firmware update again. Just run the update as normal ignoring that the LED is off.

If you are still unable to connect to the gyro try the following:

  • Open the firmware loader tool.
  • Right click on the top window bar where it says "Spartan RC Firmware Downloader".
  • From the menu select "Firmware Recovery Mode".
  • Connect the gyro.
  • Power on the gyro last.
  • Continue with the update as normal.

 

Back to Firmware
Products | Store | Support | Register | Media | Company
  ©2004-2021 Spartan RC - T&Cs of access.
Home | Contact Us