 |
 |
|
|
|
|
• Rotorhead Type - Select the rotorhead type of your helicopter.
Norm= Regular design head with rubber dampeners.
Rigid= Regular design head with hard nylon (or similar) rings instead of dampeners.
DFC= Direct Flight Control type head where the control links also act as swasplate followers. |
| • Rotor Direction - Select if the main rotor blades spin clockwise or counter-clockwise. |
| • Rotor Phase - Used to set the correct phase in some scale multi-bladed rotor heads. It is not needed for the popular 3D helicopters and should remain at 0 degrees. |
| • Complete - The rotor setup is now complete. Please proceed to the tail setup. |
|
|
 |
|
