Vortex V3 (M5), Doc. V3.01 |
Governor On/Off | |
Rotor RPM | |
• Rotor RPM - Selects the desired RPM for the main rotor. The selected value is used by the governor, rotor phase optimiser and vibration filtering algorithms. Set this parameter even if you are not using the built in governor. In this case the RPM value does not need to be precise and a best guess within +/- 100RPM would be acceptable. | |
Governor Gain | |
Engage Ramp | |
Autorotation Abort | |
Abort Exponential | |
Minimum Throttle Limit | |
Stick On/Off Point | |
Cyclic to Throttle Mix | |
Collective to Throttle Mix | |
Collective to Throttle Boost |
Spartan ©2004-2024 |