Vortex V3 (M5), Doc. V3.01 |
Read Me Now | |
Receiver | |
Transmitter | |
Sensor | |
Swashplate | |
Rotor | |
• Rotorhead Type - Select the rotorhead type of your helicopter. Norm= Regular design head with rubber dampeners. Rigid= Regular design head with hard nylon (or similar) rings instead of dampeners. DFC= Direct Flight Control type head where the control links also act as swasplate followers. |
|
• Rotor Direction - Select if the main rotor blades spin clockwise or counter-clockwise. | |
• Rotor Phase - Used to set the correct phase in some scale multi-bladed rotor heads. It is not needed for the popular 3D helicopters and should remain at 0 degrees. | |
• Complete - The rotor setup is now complete. Please proceed to the tail setup. | |
Tail | |
Throttle | |
Heli Wizard | |
Style Wizard |
Spartan ©2004-2024 |