Products | Store | Support | Register | Media | Company  

Knowledge base Vortex VX1 General
Topics in General
Topic Question Answer
150 How does the built-in failsafe of the Vortex work? Receivers with built in failsafe Most modern radio systems incorporate a failsafe feature built in to the receiver. When the radio signal is lost...
146 Can I use the Vortex as a gyro/governor only with my flybar heli until I convert to flybarless? Yes you can. However, the swash servos will need to be connected to the Vortex. To disable the flybaless stabilisation adjust the following...
140 How to control a glow igniter, lights, retracts or a fourth swash servo from the Vortex. This is a topic placeholder so it can be referenced from the Vortex user guide. Content will be added in due course. In the meantime please see this...
142 How can I clear the stored rotor trims? Start a new trim flight. The DataPod screen will display "HOVER NOW". Press [S] to cancel the trim flight. This will exit the trim flight...
151 Which governor sensors are compatible with the Vortex? Magnetic pickup RPM sensors for nitro and gassers The Spartan RPM sensor is specifically designed to work with the Vortex. Part no: SRC-RPM and...
171 What is the difference between the Vortex VX1 and VX1n flybarless systems. The VX1 incorporates a remote sensor unit whist the VX1n has all parts contained in a single box. Both Vortex VX1 and VX1n utilise same software and...
172 Does the Vortex work with DMSS satellites? The best solution for DMSS users is the RG731BX full range receiver offering single wire connection to the Vortex using JR's XBUS protocol. The...

Back to Knowledge base
Products | Store | Support | Register | Media | Company
  ©2004-2022 Spartan RC - T&Cs of access.
Home | Contact Us