Products | Store | Forum | Support | Register | Media | Company  

Knowledge base Flash-Link
Knowledge base Quark Configuration software

Question #118
Simplex Data Adapter (SLX) and Flash-Link compatibility notice.
Answer

The Simplex Data Adapter (SLX) is compatible with the latest version of the Flash-Link only (red label). Older versions of the Flash-Link can be used but a small modification is required. Without this modification the Quark configuration software will be unable to detect and communicate with your gyro.

As pictured below a 10K resistor must be fitted between the ground pin and the middle pin of the Flash-Link connector. It is possible to friction fit the resistor between the crimp terminals and connector housing without any soldering.

Back to Knowledge base
Products | Store | Forum | Support | Register | Media | Company
  ©2004-2018 Spartan RC - T&Cs of access.
Home | Contact Us