Products | Store | Support | Register | Media | Company  

Knowledge base Quark Installation & setup

Question #13
Do the servo endpoints need to be equal?

No, and this is why our gyros provide independent endpoint adjustment for each end. You should however try to avoid extreme difference (greater than 30%) between the two endpoints. Also we recommend that you initially place the servo ball link at the distance that will result to combined servo endpoints greater than 200%. For example 120% on one side and 80% on the other.

Back to Installation & setup
Products | Store | Support | Register | Media | Company
  ©2004-2022 Spartan RC - T&Cs of access.
Home | Contact Us