Products | Store | Forum | Support | Register | Media | Company  

Knowledge base Blue-Link

Question #132
Terminology related to Spartan products.
Answer
Bridge Mode - A functionality of the DataPod that allows other products to be connected to the computer via USB. It is a new more elegant form of the Virtual Flash-Link. Bridge Mode is built in to the DataPod and is always available regardless of what application is installed on the DataPod. To activate hold the DataPod's [S] button pressed whist plugging it to USB.
 
Duplex - A communication mode used by the ds760 gyro. It utilises two wires for data exchange; One to transmit commands and one to receive replies. It is the native mode of the Flash-Link and Blue-Link interfaces.

Host Product - A product that the DataPod connects to in order to adjust its parameters. For example: ds760, Quark, VX1, etc

Simplex - A communication mode used by the Quark gyro. It utilises one wire only for data exchange. First a command is sent to the gyro followed by a reply that is sent back on the same wire. 

Simplex Data Adapter (SLX) - A Spartan product that converts Duplex communication to Simplex. It is primarily used to allow the Quark gyro to be connected to the Flash-Link or Blue-Link interface.

Virtual Flash-Link - A functionality of the DataPod that makes it appear as a serial (COM) port on your computer, thus allowing the ds760 and Quark firmware update and parameter editor programs to communicate with the gyro through the DataPod. Virtual Flash-Link is part of the DataPod application "Editor for ds760 and Quark" and was introduced in version 1v10. It supports both Duplex and Simplex modes without additional harware adapters.

 



 
 
 
Back to Blue-Link
Products | Store | Forum | Support | Register | Media | Company
  ©2004-2019 Spartan RC - T&Cs of access.
Home | Contact Us