Products | Store | Forum | Support | Register | Media | Company  

Knowledge base ds760 Configuration software

Question #24
Can I see the actual gyro gain using the Flash-Link interface cable?
Answer
Download and run the latest version of the PC software.
Power on the helicopter/gyro and your transmitter.
Right click anywhere on the top bar of the PC software and from the drop down list click on "Start Diagnostics".
Over the large Spartan RC logo will appear a line of gray text which shows the sensor, rudder and gain signals read by the ds760's microcomputer. The actual operating gain is displayed as a % at the right hand side.
To exit diagnostics mode right click on the top window bar and select "Stop diagnostics".
Back to Knowledge base
Products | Store | Forum | Support | Register | Media | Company
  ©2004-2019 Spartan RC - T&Cs of access.
Home | Contact Us