Products | Store | Support | Register | Media | Company  

Knowledge base Quark Installation & setup

Question #5
I fly with reverse tail. How should I setup gyro reversing?
If you use reverse tail (meaning that with left rudder stick the helicopter yaws clockwise) while configuring your Spartan gyro reversing you need to push the stick in the opposite direction that you would do normally. Therefore if the gyro is mounted upright you will need to push the rudder to the right and if mountted invrted to the left. Always check that the gyro responds correctly before taking off.
Back to Installation & setup
Products | Store | Support | Register | Media | Company
  ©2004-2022 Spartan RC - T&Cs of access.
Home | Contact Us