![]() |
Products | Store | Support | Register | Media | Company |
![]() |
Knowledge base
![]() ![]() |
Question #77
I run my gyro and servo at 6V so the servo is faster than the preset value in the configuration editor. Does it have any effect?
Answer
The pre-set values in the configuration software are provided for convenience. You can adjust the servo speed as needed, for example if your run your servo at a higher voltage which enables it to operate faster. |
||
![]() |
Products | Store | Support | Register | Media | Company | |
![]() | |
©2004-2023 Spartan RC - T&Cs of access. |
Home | Contact Us |